Restoration Procedure

1. A full inspection will be carried out, any broken tiles will be replaced.
2. We pressure clean your house roof to remove dirt, moss and lichen, leaving a clean surface.
3. Any loose ridge cappings will be repaired, and then repointed with a flexible mortar.
4. After the roof has been cleaned and repaired, we will apply a sealer coating that will prevent moisture absorption.
5. Two coats of roof membrane will then be applied to give your roof an “as new” appearance.

1. High pressure clean the roof to remove dirt and flaky paint.
2. Re-tighten loose iron, tek screw where necessary.
3. Apply a suitable primer, metal etch or anti-rust.
4. Apply two coats of membrane, or 1 coat of rustguard (depending on roof condition).